How to increase the service life of chicken raising equipment

1. To complete each batch of chicken raising equipment, it is necessary to check the wire snapshots and screw tightening conditions as soon as possible, and upgrade the system again.
2. When the feed material is loaded into the hopper, large dust will be generated, and sometimes the feeding mechanism cannot be started. This is because the photoelectric switch controls the feeding to stop and the machine body is covered with dust, making it impossible to start unloading.
3. The power supply of the automatic chicken raising equipment drive mode is started. The spiral motor is a high-speed motor, so when the power is cut off, the motor belt must be regularly checked for aging.
4. Check whether the chain and sprocket are correct, and whether the chain drive is loose or rusty.
5. After each batch is processed, stick it on the motor shaft and add butter to the chicken feed line for maintenance. You can add a few drops of vegetable oil to the motor to avoid rust.
6. Chicken raising equipment should have no track obstacles, otherwise there will be deviations.
7. The feeder is controlled by gears and chains to raise chickens. The gears and chains have hard teeth that cooperate with each part. Chicken raising equipment 7 should keep hard-toothed gears and chains lubricated to avoid some damage caused by lack of lubrication.